Development of design for design of the universal service on the DIN rail for telemetry equipment used in the monitoring of water and sewage networks. (Q81859): Difference between revisions

From EU Knowledge Graph
Jump to navigation Jump to search
(‎Changed an Item)
(‎Removed claim: summary (P836): SA.42799 (2015/X) The project is the purchase of external consultancy services consisting of the purchase of an external consultancy for the development of a copyright design process and the implementation of new products on the market in the form of three base casings 1, 2 and 4 times the core of the core module, together with three assembly bases.The design will be 3 basic housing (3 design projects) with a width of 1, 2 and 4 times the core...)
Property / summary
SA.42799 (2015/X) The project is the purchase of external consultancy services consisting of the purchase of an external consultancy for the development of a copyright design process and the implementation of new products on the market in the form of three base casings 1, 2 and 4 times the core of the core module, together with three assembly bases.The design will be 3 basic housing (3 design projects) with a width of 1, 2 and 4 times the core DIN core width (core module width of the DIN core module) and 3 mounting blocks (backloaded) of the same size, which can be combined permanently with each other with a compact modular basis with the required width of modules.Each of the 3 base housings shall consist of two parts:the lower and the upper which, after the merger, form the enclosed space for the installation of the electronic module concerned.These housings shall be fitted to the mounting base by means of a latch or gtr, and the whole assembly shall be mounted on the DIN rail also by means of a latch or gtr.The base will be fitted with a connector system to ensure that the communication interface is brought into operation by the central unit for communication with the other modules and, where appropriate, the power supply.This method of assembly is intended to allow one of the modules to be easily removed from the base, without the ground being required from the DIN bus.Interconnection of modules:the centre unit will be located on the right side of the centre and on the right and the smart modules on the left. (English)
 
Property / summary: SA.42799 (2015/X) The project is the purchase of external consultancy services consisting of the purchase of an external consultancy for the development of a copyright design process and the implementation of new products on the market in the form of three base casings 1, 2 and 4 times the core of the core module, together with three assembly bases.The design will be 3 basic housing (3 design projects) with a width of 1, 2 and 4 times the core DIN core width (core module width of the DIN core module) and 3 mounting blocks (backloaded) of the same size, which can be combined permanently with each other with a compact modular basis with the required width of modules.Each of the 3 base housings shall consist of two parts:the lower and the upper which, after the merger, form the enclosed space for the installation of the electronic module concerned.These housings shall be fitted to the mounting base by means of a latch or gtr, and the whole assembly shall be mounted on the DIN rail also by means of a latch or gtr.The base will be fitted with a connector system to ensure that the communication interface is brought into operation by the central unit for communication with the other modules and, where appropriate, the power supply.This method of assembly is intended to allow one of the modules to be easily removed from the base, without the ground being required from the DIN bus.Interconnection of modules:the centre unit will be located on the right side of the centre and on the right and the smart modules on the left. (English) / rank
Normal rank
 

Revision as of 11:18, 14 October 2020

Project in Poland financed by DG Regio
Language Label Description Also known as
English
Development of design for design of the universal service on the DIN rail for telemetry equipment used in the monitoring of water and sewage networks.
Project in Poland financed by DG Regio

    Statements

    country
    Poland
    0 references
    EU contribution
    163,914.0 zloty
    0 references
    39,339.36 Euro
    exchange rate to Euro
    0.24 Euro
    point in time
    13 January 2020
    0 references
    budget
    192,840.0 zloty
    0 references
    46,281.6 Euro
    exchange rate to Euro
    0.24 Euro
    point in time
    13 January 2020
    0 references
    co-financing rate
    85.0 percent
    0 references
    start time
    1 October 2019
    0 references
    end time
    31 March 2021
    0 references
    beneficiary name (string)
    INVENTIA SP. Z O.O.
    0 references
    beneficiary
    Q2511856
    0 references
    summary
    SA.42799(2015/X) Przedmiotem projektu jest zakup zewnętrznych usług doradczych polegających na przeprowadzeniu profesjonalnego procesu projektowego w celu opracowania autorskich projektów wzorniczych i wdrożenia na rynek nowych produktów w postaci trzech bazowych obudów o szerokości 1, 2 i 4-krotnej szerokości podstawowego modułu DIN wraz z trzema podstawami montażowymi. Opracowanie zostaną 3 bazowe obudowy (3 projekty wzornicze) o szerokości 1, 2 i 4-krotnej szerokości podstawowego modułu DIN (szerokość modułu podstawowego DIN wynosi 17,5 mm) oraz 3 podstawy montażowe (backplane) o tych samych rozmiarach szerokościowych, które będzie można łączyć trwale ze sobą uzyskując zwartą podstawę zabudowy modułowej o żądanej szerokości, mieszczącej pożądaną liczbę modułów. Każda z 3 obudów bazowych będzie się składać z dwóch części: dolnej oraz górnej, które po połączeniu tworzą zamkniętą przestrzeń mieszczącą zasoby elektroniczne danego modułu. Obudowy te będą montowane do podstawy montażowej z wykorzystaniem zatrzasku lub rygla i dalej całość będzie montowana na szynę DIN również z użyciem zatrzasku lub rygla. Podstawy będą posiadały system złączy, zapewniający doprowadzenie sygnałów interfejsu komunikacyjnego wykorzystywanego przez jednostkę centralną do komunikacji z pozostałymi modułami i ewentualnie zasilania. Taki sposób montażu ma pozwolić na łatwe wyjęcie jednego z modułów z podstawy, bez konieczności wypinania podstawy z magistrali DIN. Ułożenie wzajemne modułów: jednostka centralna będzie po środku, moduły we/wy będą po jej prawej stronie, a moduły inteligentne po jej lewej stronie. (Polish)
    0 references

    Identifiers

    Polish Kohesio ID
    POIR.02.03.05-14-0081/19
    0 references
     
    Retrieved from "https://linkedopendata.eu/w/index.php?title=Item:Q81859&oldid=6331995"