A soft or small scale tool for small series production using the point drawing of the sheets (Q11148)

From EU Knowledge Graph
Revision as of 07:32, 26 February 2020 by DG Regio (talk | contribs) (‎Created claim: summary (P836): The project is developing by cremental Forming, which is the method by which the sheet is drawn up by means of a so-called ‘soft’ movement in 3 axes. The project aims to develop a prototype equipment with anti-common support mechanism that is suitable for producing smaller units for the production of smaller single-purpose special machines or parts necessary for the design of prototypes. The goal is a technology similar to that of 3D printing,...)
Jump to navigation Jump to search
Project in Czech Republic financed by DG Regio
Language Label Description Also known as
English
A soft or small scale tool for small series production using the point drawing of the sheets
Project in Czech Republic financed by DG Regio

    Statements

    0 references
    3,712,242.77 Czech koruna
    0 references
    148,489.7108 Euro
    10 January 2020
    0 references
    6,025,390.0 Czech koruna
    0 references
    241,015.6 Euro
    10 January 2020
    0 references
    61.6099998506321 percent
    0 references
    1 October 2017
    0 references
    30 September 2019
    0 references
    CLUTEX - Klastr Technické textilie,z.s.
    0 references

    50°45'29.05"N, 15°2'34.94"E
    0 references
    46007
    0 references
    Projekt rozvíjí technologii incremental forming, což je metoda tažení plechu pomocí tzv. výtlačného trnu pohyblivého ve 3 osách. Projekt má za cíl vyvinout prototyp tvarovacího zařízení s protiběžným podpůrným mechanismem, který bude vhodný pro výrobu menších dílů pro kusovou výrobu unikátních jednoúčelových speciálních strojů či pro výrobu dílů nutných pro konstrukci prototypových zařízení. Cílem je technologie obdobná svým zaměřením 3D tisku, ale založená na tvarování tažením. a. (Czech)
    0 references
    The project is developing by cremental Forming, which is the method by which the sheet is drawn up by means of a so-called ‘soft’ movement in 3 axes. The project aims to develop a prototype equipment with anti-common support mechanism that is suitable for producing smaller units for the production of smaller single-purpose special machines or parts necessary for the design of prototypes. The goal is a technology similar to that of 3D printing, but based on the texturing of tapestry. (English)
    0 references

    Identifiers

    CZ.01.1.02/0.0/0.0/16_079/0007488
    0 references