Renovation of public buildings: The TSO of the Dyów ul. Barkówka, the TSO of the Dyów, ul. School, Primary School No 2 at ul. Dínówka in Dynów, Building of the Municipal Office in Dynów (Q118622): Difference between revisions
Jump to navigation
Jump to search
(Removed claim: summary (P836): The aim of the project is to improve the efficiency of public buildings in the Dynów in the construction of energy-efficient buildings with the simultaneous introduction of an energy management system. The project will undergo thermal modernisation of 4 public utility buildings, i.e. two buildings of the TSO, the Primary School and the Urban Office in the Dynów. The Urban Authority building will include, inter alia, thermal insulation of exter...) |
(Created claim: summary (P836): The aim of the project is to improve the efficiency of public buildings in Dynowa to the level of energy-efficient construction with the simultaneous introduction of an energy management system. Within the framework of the project, 4 public utility buildings, i.e. two OSP buildings, Primary School and the Municipal Office building in Dynowo will be thermally modernised. The building of the Municipal Office will include thermal insulation of exte...) |
||||||||||||||
| Property / summary | |||||||||||||||
The aim of the project is to improve the efficiency of public buildings in Dynowa to the level of energy-efficient construction with the simultaneous introduction of an energy management system. Within the framework of the project, 4 public utility buildings, i.e. two OSP buildings, Primary School and the Municipal Office building in Dynowo will be thermally modernised. The building of the Municipal Office will include thermal insulation of external and foundation walls as well as thermal insulation of roof over bays. In addition, the door and window carpentry will be replaced, as well as modernisation of the heating inst. by replacing the boiler with the reconstruction of the inst. What. The project will produce energy-saving lighting and a set of micro-sources of RES – photovoltaic installation. OSP building on ul. The school plans include thermal insulation of the ceiling, exterior and foundation walls with the replacement of door and window carpentry. The installation of the boiler with the modernisation of the inst was also planned. Co and CWU. In addition, energy-saving lighting and a set of micro-sources of RES – photovoltaic inst. will be installed. OSP building on ul. Bartkówka – thermal insulation of the ceiling of the last conduit and exterior walls and foundation. together with the replacement of the door and window joinery. In addition, it is planned to install a heating boiler together with the modernisation of the CO and CWU installations as well as the production of energy-saving lighting. In addition, a set of micro-sources of RES – photovoltaic installation will be installed. In building SP no. 2 in the building there will be thermal insulation of external walls and floor floor, replacement of door and window carpentry and replacement of lighting for energy-efficient. To sum up, 4 buildings will be modernised, 3 RES generation units will be built, and 3 heat sources will be modernised. (English) | |||||||||||||||
| Property / summary: The aim of the project is to improve the efficiency of public buildings in Dynowa to the level of energy-efficient construction with the simultaneous introduction of an energy management system. Within the framework of the project, 4 public utility buildings, i.e. two OSP buildings, Primary School and the Municipal Office building in Dynowo will be thermally modernised. The building of the Municipal Office will include thermal insulation of external and foundation walls as well as thermal insulation of roof over bays. In addition, the door and window carpentry will be replaced, as well as modernisation of the heating inst. by replacing the boiler with the reconstruction of the inst. What. The project will produce energy-saving lighting and a set of micro-sources of RES – photovoltaic installation. OSP building on ul. The school plans include thermal insulation of the ceiling, exterior and foundation walls with the replacement of door and window carpentry. The installation of the boiler with the modernisation of the inst was also planned. Co and CWU. In addition, energy-saving lighting and a set of micro-sources of RES – photovoltaic inst. will be installed. OSP building on ul. Bartkówka – thermal insulation of the ceiling of the last conduit and exterior walls and foundation. together with the replacement of the door and window joinery. In addition, it is planned to install a heating boiler together with the modernisation of the CO and CWU installations as well as the production of energy-saving lighting. In addition, a set of micro-sources of RES – photovoltaic installation will be installed. In building SP no. 2 in the building there will be thermal insulation of external walls and floor floor, replacement of door and window carpentry and replacement of lighting for energy-efficient. To sum up, 4 buildings will be modernised, 3 RES generation units will be built, and 3 heat sources will be modernised. (English) / rank | |||||||||||||||
Normal rank | |||||||||||||||
| Property / summary: The aim of the project is to improve the efficiency of public buildings in Dynowa to the level of energy-efficient construction with the simultaneous introduction of an energy management system. Within the framework of the project, 4 public utility buildings, i.e. two OSP buildings, Primary School and the Municipal Office building in Dynowo will be thermally modernised. The building of the Municipal Office will include thermal insulation of external and foundation walls as well as thermal insulation of roof over bays. In addition, the door and window carpentry will be replaced, as well as modernisation of the heating inst. by replacing the boiler with the reconstruction of the inst. What. The project will produce energy-saving lighting and a set of micro-sources of RES – photovoltaic installation. OSP building on ul. The school plans include thermal insulation of the ceiling, exterior and foundation walls with the replacement of door and window carpentry. The installation of the boiler with the modernisation of the inst was also planned. Co and CWU. In addition, energy-saving lighting and a set of micro-sources of RES – photovoltaic inst. will be installed. OSP building on ul. Bartkówka – thermal insulation of the ceiling of the last conduit and exterior walls and foundation. together with the replacement of the door and window joinery. In addition, it is planned to install a heating boiler together with the modernisation of the CO and CWU installations as well as the production of energy-saving lighting. In addition, a set of micro-sources of RES – photovoltaic installation will be installed. In building SP no. 2 in the building there will be thermal insulation of external walls and floor floor, replacement of door and window carpentry and replacement of lighting for energy-efficient. To sum up, 4 buildings will be modernised, 3 RES generation units will be built, and 3 heat sources will be modernised. (English) / qualifier | |||||||||||||||
point in time: 20 October 2020
| |||||||||||||||
Revision as of 16:33, 20 October 2020
Project in Poland financed by DG Regio
| Language | Label | Description | Also known as |
|---|---|---|---|
| English | Renovation of public buildings: The TSO of the Dyów ul. Barkówka, the TSO of the Dyów, ul. School, Primary School No 2 at ul. Dínówka in Dynów, Building of the Municipal Office in Dynów |
Project in Poland financed by DG Regio |
Statements
1,175,555.95 zloty
0 references
1,383,007.02 zloty
0 references
85.0 percent
0 references
29 December 2014
0 references
31 December 2017
0 references
GMINA MIEJSKA DYNÓW
0 references
Celem projektu jest poprawa efektywności budynków użyteczności publicznej w Dynowie do poziomu budownictwa energooszczędnego z równoczesnym wprowadzaniem systemu zarządzania energią. W ramach projektu, poddane zostaną termomodernizacji 4 budynki użyteczności publicznej tj. dwa budynki OSP, Szkoła Podstawowa oraz budynek Urzędu Miejskiego w Dynowie. W budynku Urzędu Miejskiego wykonane zostaną m.in. izolacje termiczne ścian zewnętrznych oraz fundamentowej a także izolacja termiczna dachu nad wykuszami. Ponadto, wymieniona zostanie stolarka drzwiowa i okienna oraz wykonana zostanie modernizacja inst. grzewczej poprzez wymianę kotła grzewczego wraz z przebudową inst. CO. W ramach projektu wykonane zostanie oświetlenie energooszczędne oraz zamontowany zostanie zestaw mikroźródła OZE -instalacja fotowoltaiczna. Budynek OSP przy ul. Szkolnej- planuje się m.in. wykonanie izolacji termicznej stropu oraz ścian zewnętrznych i fundamentowej wraz z wymianą stolarki drzwiowej i okiennej. Zaplanowano także montaż kotła grzewczego wraz z modernizacją inst. CO oraz CWU. Ponadto zamontowane zostanie oświetlenie energooszczędne oraz zestaw mikroźródła OZE – inst. fotowoltaiczna. Budynek OSP przy ul. Bartkówka- wykonana zostanie izolacja termiczna stropu ostatniej kond. oraz ścian zewn. i fundament. wraz z wymianą stolarki drzwiowej i okiennej. Ponadto planuje się montaż kotła grzewczego wraz z modernizacją instalacji CO oraz CWU a także wykonanie oświetlenia energooszczędnego. Ponadto zamontowany zostanie zestaw mikroźródła OZE -instalacja fotowoltaiczna. W budynku SP nr 2 w wykonana zostanie m.in. izolacja termiczna ścian zewn. oraz stropu parteru, wymiana stolarki drzwiowej i okiennej oraz wymiana oświetlenia na energooszczędne. Reasumując w ramach projektu zmodernizowane zostaną 4 budynki, wybudowane zostaną 3 jednostki wytwarzania energii elektrycznej z OZE, oraz zmodernizowane zostaną 3 źródła ciepła. (Polish)
0 references
The aim of the project is to improve the efficiency of public buildings in Dynowa to the level of energy-efficient construction with the simultaneous introduction of an energy management system. Within the framework of the project, 4 public utility buildings, i.e. two OSP buildings, Primary School and the Municipal Office building in Dynowo will be thermally modernised. The building of the Municipal Office will include thermal insulation of external and foundation walls as well as thermal insulation of roof over bays. In addition, the door and window carpentry will be replaced, as well as modernisation of the heating inst. by replacing the boiler with the reconstruction of the inst. What. The project will produce energy-saving lighting and a set of micro-sources of RES – photovoltaic installation. OSP building on ul. The school plans include thermal insulation of the ceiling, exterior and foundation walls with the replacement of door and window carpentry. The installation of the boiler with the modernisation of the inst was also planned. Co and CWU. In addition, energy-saving lighting and a set of micro-sources of RES – photovoltaic inst. will be installed. OSP building on ul. Bartkówka – thermal insulation of the ceiling of the last conduit and exterior walls and foundation. together with the replacement of the door and window joinery. In addition, it is planned to install a heating boiler together with the modernisation of the CO and CWU installations as well as the production of energy-saving lighting. In addition, a set of micro-sources of RES – photovoltaic installation will be installed. In building SP no. 2 in the building there will be thermal insulation of external walls and floor floor, replacement of door and window carpentry and replacement of lighting for energy-efficient. To sum up, 4 buildings will be modernised, 3 RES generation units will be built, and 3 heat sources will be modernised. (English)
20 October 2020
0 references
Identifiers
RPPK.03.02.00-18-0005/16
0 references