The purchase of R & D services for the introduction of new technological developments in PROREST. (Q111430): Difference between revisions
Jump to navigation
Jump to search
(Removed claim: summary (P836): The project will consist of the purchase of a R & D service. research will aim at developing the Assembly’s technology for the assembly of Retainer asemembly. The research will include material engineering studies, including mechanical properties, construction of test benches for assembly process and tests in real conditions. The project consists of a mm film ring with a thickness of 1.04 0.13 mm and a diameter of 17,86 0,13 26,54 0.13 mm, whi...) |
(Created claim: summary (P836): The project will consist of purchasing a research service.Research work will be aimed at developing assembly assembly assembly assembly technology. The research works will include research in the field of material engineering, including mechanical properties, construction of test stations for the assembly process and carrying out tests under real conditions. The subject of the project is a washer ring with a thickness of 1.04 0.13 mm and a diame...) |
||||||||||||||
| Property / summary | |||||||||||||||
The project will consist of purchasing a research service.Research work will be aimed at developing assembly assembly assembly assembly technology. The research works will include research in the field of material engineering, including mechanical properties, construction of test stations for the assembly process and carrying out tests under real conditions. The subject of the project is a washer ring with a thickness of 1.04 0.13 mm and a diameter of 17.86 0.13 26,54 0,13 mm, which must be passed through the 162A thread diameter 18.9 0.1 in detail retainer and then tighten the slide on the diameter of 16.76 0.05 0.08 with max in bulk 0.013 mm. In the project presented, there is an unusual situation, because a ring with an internal diameter of 17.86 should be mounted by moving it through an object with a diameter of 18.9 Original considerations to perform such an assembly operation by heating the ring so that its sizes are increased by thermal dilation, and the second part cooling to reduce its dimensions proved completely unrealistic, inter alia, due to the cost of the instrumentation and the assembly process itself. It became necessary to search for a new, innovative method of assembly using double plastic deformation. The essential condition is to comply with the required accuracy and tolerance. For the implementation of the planned assembly process, it is necessary to develop a special instrumentation with control of the pressure force and the extent of deformation. This type of technological instrumentation is not available in the offer of domestic and foreign producers. (English) | |||||||||||||||
| Property / summary: The project will consist of purchasing a research service.Research work will be aimed at developing assembly assembly assembly assembly technology. The research works will include research in the field of material engineering, including mechanical properties, construction of test stations for the assembly process and carrying out tests under real conditions. The subject of the project is a washer ring with a thickness of 1.04 0.13 mm and a diameter of 17.86 0.13 26,54 0,13 mm, which must be passed through the 162A thread diameter 18.9 0.1 in detail retainer and then tighten the slide on the diameter of 16.76 0.05 0.08 with max in bulk 0.013 mm. In the project presented, there is an unusual situation, because a ring with an internal diameter of 17.86 should be mounted by moving it through an object with a diameter of 18.9 Original considerations to perform such an assembly operation by heating the ring so that its sizes are increased by thermal dilation, and the second part cooling to reduce its dimensions proved completely unrealistic, inter alia, due to the cost of the instrumentation and the assembly process itself. It became necessary to search for a new, innovative method of assembly using double plastic deformation. The essential condition is to comply with the required accuracy and tolerance. For the implementation of the planned assembly process, it is necessary to develop a special instrumentation with control of the pressure force and the extent of deformation. This type of technological instrumentation is not available in the offer of domestic and foreign producers. (English) / rank | |||||||||||||||
Normal rank | |||||||||||||||
| Property / summary: The project will consist of purchasing a research service.Research work will be aimed at developing assembly assembly assembly assembly technology. The research works will include research in the field of material engineering, including mechanical properties, construction of test stations for the assembly process and carrying out tests under real conditions. The subject of the project is a washer ring with a thickness of 1.04 0.13 mm and a diameter of 17.86 0.13 26,54 0,13 mm, which must be passed through the 162A thread diameter 18.9 0.1 in detail retainer and then tighten the slide on the diameter of 16.76 0.05 0.08 with max in bulk 0.013 mm. In the project presented, there is an unusual situation, because a ring with an internal diameter of 17.86 should be mounted by moving it through an object with a diameter of 18.9 Original considerations to perform such an assembly operation by heating the ring so that its sizes are increased by thermal dilation, and the second part cooling to reduce its dimensions proved completely unrealistic, inter alia, due to the cost of the instrumentation and the assembly process itself. It became necessary to search for a new, innovative method of assembly using double plastic deformation. The essential condition is to comply with the required accuracy and tolerance. For the implementation of the planned assembly process, it is necessary to develop a special instrumentation with control of the pressure force and the extent of deformation. This type of technological instrumentation is not available in the offer of domestic and foreign producers. (English) / qualifier | |||||||||||||||
point in time: 20 October 2020
| |||||||||||||||
Revision as of 11:30, 20 October 2020
Project in Poland financed by DG Regio
| Language | Label | Description | Also known as |
|---|---|---|---|
| English | The purchase of R & D services for the introduction of new technological developments in PROREST. |
Project in Poland financed by DG Regio |
Statements
85,000.0 zloty
0 references
100,000.0 zloty
0 references
85.0 percent
0 references
1 September 2019
0 references
30 November 2019
0 references
STAWOWY PIOTR ZAKŁAD WYROBÓW METALOWYCH PRODUKCYJNO REMONTOWY "PROREST" ZOFIA, PIOTR STAWOWY
0 references
Projekt będzie polegał na zakupie usługi badawczorozwojowej.Prace badawcze będą miały na celu opracowanie technologii montażu zespołu Retainer assembly. Prace badawcze będą obejmowały badania z zakresu inżynierii materiałowej, m.in. właściwości mechanicznych, budowy stanowisk badawczych do procesu montażu oraz przeprowadzenie prób w warunkach rzeczywistych. Przedmiotem projektu jest pierścień washer o grubości 1.04 0,13 mm i średnicy 17,86 0,13 26,54 0,13 mm, który należy przełożyć przez gwint 162A średnica zewnętrzna gwintu 18,9 0.1 w detalu retainer i następnie zacisnąć suwliwie na średnicy 16,76 0.05 0.08 z max luzem 0.013 mm. W przedstawionym projekcie mamy do czynienia z nietypową sytuacją, bowiem należy zamontować pierścień o średnicy wewnętrznej 17.86 przemieszczając go przez przedmiot o średnicy 18.9 Pierwotne rozważania, aby wykonać taką operację montażową podgrzewając pierścień tak, żeby jego rozmiary uległy powiększeniu w wyniku dylacji termicznej, zaś część drugą oziębiając, aby zmniejszyć jej wymiary okazały się całkowicie nierealne między innymi z uwagi na koszty oprzyrządowania oraz samego procesu montażu. Konieczne stało się poszukiwanie nowej, innowacyjnej metody montażu z zastosowaniem podwójnej deformacji plastycznej. Warunkiem zasadniczym jest dotrzymanie wymaganej dokładności i tolerancji. Dla realizacji planowanego procesu montażu konieczne jest opracowanie specjalnego oprzyrządowania z nadzorowaniem siły nacisku oraz zakresu deformacji. Tego typu oprzyrządowanie technologiczne nie jest dostępne w ofertach producentów krajowych i zagranicznych. (Polish)
0 references
The project will consist of purchasing a research service.Research work will be aimed at developing assembly assembly assembly assembly technology. The research works will include research in the field of material engineering, including mechanical properties, construction of test stations for the assembly process and carrying out tests under real conditions. The subject of the project is a washer ring with a thickness of 1.04 0.13 mm and a diameter of 17.86 0.13 26,54 0,13 mm, which must be passed through the 162A thread diameter 18.9 0.1 in detail retainer and then tighten the slide on the diameter of 16.76 0.05 0.08 with max in bulk 0.013 mm. In the project presented, there is an unusual situation, because a ring with an internal diameter of 17.86 should be mounted by moving it through an object with a diameter of 18.9 Original considerations to perform such an assembly operation by heating the ring so that its sizes are increased by thermal dilation, and the second part cooling to reduce its dimensions proved completely unrealistic, inter alia, due to the cost of the instrumentation and the assembly process itself. It became necessary to search for a new, innovative method of assembly using double plastic deformation. The essential condition is to comply with the required accuracy and tolerance. For the implementation of the planned assembly process, it is necessary to develop a special instrumentation with control of the pressure force and the extent of deformation. This type of technological instrumentation is not available in the offer of domestic and foreign producers. (English)
20 October 2020
0 references
Identifiers
RPMP.01.02.03-12-0177/19
0 references