Sangjin Micron Hungary Kft’s capacity-enhancing investment to further strengthen the supplier position. (Q3914487): Difference between revisions
Jump to navigation
Jump to search
(Changed an Item: add summary) |
(Changed an Item: Adding English translations) |
||||||||||||||
| Property / summary | |||||||||||||||
The manufacturing process takes place through the following steps: 1. Pressing, cleaning 2nd inspection 3. assembly 4. inspection 5. packing During the production of the metal frames, the plate is placed in the press production line from the cylinder, the sheet is cut into the press production line, where the final shape of the plate is formed in a six-step process and the necessary holes and cut-outs are made on it. Next, the plates are mechanically cleaned, removing the burrs and pieces of metal produced during drilling. At the subsequent inspection stage, the holes are checked for possible pressing deformations. Also part of the process is the removal of any remaining burial at the holes. Only the perfectly prepared metal frames are placed on the production tape, where the frames are wired, gaskets are installed, the plastic casings are fixed and other electronic components are installed. As a penultimate step, full quality control of the finished product follows, and the finished pieces are packaged.The TV soles go through the same production process, with so many differences that they are made of metal pipe materials. The snap-in parts obtain their final form from coiled material after forming, tapping and special cleaning. Due to the size of their worktable — the current ones have a 1500*1000 surface — our currently existing press machines are not suitable for pressing larger plates, so we cannot produce the metal frames needed for the desired larger finished product. The machines to be procured have a larger worktable (2900*1300), so that the plates can be machined so that they are suitable for the 48“,50”,55“,65” product size. We are making progress by purchasing equipment, including in the production value chain, as we offer products that have not been manufactured so far. The equipment also leads to a qualitative expansion of production, as we will also be able to produce curved metal frames with new technology, so we can also supply Samsung’s latest high-tech curved TV. (English) | |||||||||||||||
| Property / summary: The manufacturing process takes place through the following steps: 1. Pressing, cleaning 2nd inspection 3. assembly 4. inspection 5. packing During the production of the metal frames, the plate is placed in the press production line from the cylinder, the sheet is cut into the press production line, where the final shape of the plate is formed in a six-step process and the necessary holes and cut-outs are made on it. Next, the plates are mechanically cleaned, removing the burrs and pieces of metal produced during drilling. At the subsequent inspection stage, the holes are checked for possible pressing deformations. Also part of the process is the removal of any remaining burial at the holes. Only the perfectly prepared metal frames are placed on the production tape, where the frames are wired, gaskets are installed, the plastic casings are fixed and other electronic components are installed. As a penultimate step, full quality control of the finished product follows, and the finished pieces are packaged.The TV soles go through the same production process, with so many differences that they are made of metal pipe materials. The snap-in parts obtain their final form from coiled material after forming, tapping and special cleaning. Due to the size of their worktable — the current ones have a 1500*1000 surface — our currently existing press machines are not suitable for pressing larger plates, so we cannot produce the metal frames needed for the desired larger finished product. The machines to be procured have a larger worktable (2900*1300), so that the plates can be machined so that they are suitable for the 48“,50”,55“,65” product size. We are making progress by purchasing equipment, including in the production value chain, as we offer products that have not been manufactured so far. The equipment also leads to a qualitative expansion of production, as we will also be able to produce curved metal frames with new technology, so we can also supply Samsung’s latest high-tech curved TV. (English) / rank | |||||||||||||||
Normal rank | |||||||||||||||
| Property / summary: The manufacturing process takes place through the following steps: 1. Pressing, cleaning 2nd inspection 3. assembly 4. inspection 5. packing During the production of the metal frames, the plate is placed in the press production line from the cylinder, the sheet is cut into the press production line, where the final shape of the plate is formed in a six-step process and the necessary holes and cut-outs are made on it. Next, the plates are mechanically cleaned, removing the burrs and pieces of metal produced during drilling. At the subsequent inspection stage, the holes are checked for possible pressing deformations. Also part of the process is the removal of any remaining burial at the holes. Only the perfectly prepared metal frames are placed on the production tape, where the frames are wired, gaskets are installed, the plastic casings are fixed and other electronic components are installed. As a penultimate step, full quality control of the finished product follows, and the finished pieces are packaged.The TV soles go through the same production process, with so many differences that they are made of metal pipe materials. The snap-in parts obtain their final form from coiled material after forming, tapping and special cleaning. Due to the size of their worktable — the current ones have a 1500*1000 surface — our currently existing press machines are not suitable for pressing larger plates, so we cannot produce the metal frames needed for the desired larger finished product. The machines to be procured have a larger worktable (2900*1300), so that the plates can be machined so that they are suitable for the 48“,50”,55“,65” product size. We are making progress by purchasing equipment, including in the production value chain, as we offer products that have not been manufactured so far. The equipment also leads to a qualitative expansion of production, as we will also be able to produce curved metal frames with new technology, so we can also supply Samsung’s latest high-tech curved TV. (English) / qualifier | |||||||||||||||
point in time: 8 February 2022
| |||||||||||||||
Revision as of 14:12, 8 February 2022
Project Q3914487 in Hungary
| Language | Label | Description | Also known as |
|---|---|---|---|
| English | Sangjin Micron Hungary Kft’s capacity-enhancing investment to further strengthen the supplier position. |
Project Q3914487 in Hungary |
Statements
804,246,306 forint
0 references
4,397,016.582 Euro
0.0027336256 Euro
14 December 2021
0 references
1,608,492,612.0 forint
0 references
50.0 percent
0 references
25 August 2016
0 references
15 November 2017
0 references
Sangjin Micron Hungary Gyártó és Kereskedelmi Korlátolt Felelősségű Társaság
0 references
47°34'6.67"N, 19°42'37.66"E
0 references
A gyártási folyamat a következő lépéseken keresztül történik: 1. préselés, tisztítás 2. ellenőrzés 3. összeszerelés 4. ellenőrzés 5. csomagolás A fémvázak gyártása során a lemez hengerről, lapra vágott lemez a préselő gépsorba kerül, ahol egy hat lépésből álló folyamat során kialakításra kerül a lemez végső formája valamint elkészülnek a szükséges furatok, kivágások rajta. Ezt kövezően gépi tisztítja le a lemezeket, eltávolítva a fúrás során keletkező sorjákat, fémdarabokat. Azt ezt követő ellenőrzési szakaszban megtörténik a furatok ellenőrzése az esetleges préselési deformációk kiszűrése. Szintén a folyamat részét képezi a furatoknál esetleg megmaradt sorják eltávolítása. A gyártó szalagra csak a tökéletesen előkészített fémvázak kerülnek, ahol megtörténik a vázak huzalozása, tömítések beszerelése, a műanyag burkolatok felrögzítése illetve egyéb elektronikai alkatrészek beszerelése. Utolsó előtti lépésként a késztermék teljes körű minőségellenőrzése következik, majd a kész darabok csomagolásra kerülnek.A TV talpak ugyanezen a gyártási folyamaton mennek keresztül, annyi különbséggel, hogy azok fémcső alapanyagból készülnek. A beépülő alkatrészek tekercselt alapanyagból, alakítás, menetfúrás és speciális tisztítás után nyerik el végső formájukat. A jelenleg meglévő présgépeink munkaasztaluk mérete miatt - a jelenlegiek 1500*1000-as felülettel rendelkeznek - nem alkalmasak a nagyobb lemezek préselésére, így a kívánt nagyobb méretű végtermékhez szükséges fémvázakat nem tudjuk legyártani. A beszerzendő gépek nagyobb munkaasztallal (2900*1300) rendelkeznek, így ezen már akkora lemezek is megmunkálhatóak, melyek megfelelőek a 48”,50”,55”,65” termékmérethez. Az eszközök beszerzésével, így a termelési értékláncban is előrelépést érünk el, hiszen eddig nem gyártott termékekkel bővül a kínálatunk. A berendezés a gyártás minőségi bővülését is eredményezi, hiszen az új technológiával ívelt fémvázak készítése is képesek leszünk, így a Samsung legújabb high-tech ívelt formájú TV-jéhez is tudunk beszállítani. (Hungarian)
0 references
The manufacturing process takes place through the following steps: 1. Pressing, cleaning 2nd inspection 3. assembly 4. inspection 5. packing During the production of the metal frames, the plate is placed in the press production line from the cylinder, the sheet is cut into the press production line, where the final shape of the plate is formed in a six-step process and the necessary holes and cut-outs are made on it. Next, the plates are mechanically cleaned, removing the burrs and pieces of metal produced during drilling. At the subsequent inspection stage, the holes are checked for possible pressing deformations. Also part of the process is the removal of any remaining burial at the holes. Only the perfectly prepared metal frames are placed on the production tape, where the frames are wired, gaskets are installed, the plastic casings are fixed and other electronic components are installed. As a penultimate step, full quality control of the finished product follows, and the finished pieces are packaged.The TV soles go through the same production process, with so many differences that they are made of metal pipe materials. The snap-in parts obtain their final form from coiled material after forming, tapping and special cleaning. Due to the size of their worktable — the current ones have a 1500*1000 surface — our currently existing press machines are not suitable for pressing larger plates, so we cannot produce the metal frames needed for the desired larger finished product. The machines to be procured have a larger worktable (2900*1300), so that the plates can be machined so that they are suitable for the 48“,50”,55“,65” product size. We are making progress by purchasing equipment, including in the production value chain, as we offer products that have not been manufactured so far. The equipment also leads to a qualitative expansion of production, as we will also be able to produce curved metal frames with new technology, so we can also supply Samsung’s latest high-tech curved TV. (English)
8 February 2022
0 references
Jászfényszaru, Jász-Nagykun-Szolnok
0 references
Identifiers
GINOP-1.2.1-15-2015-00533
0 references