System for early detection of condensation on heat exchange surfaces (Q10236): Difference between revisions

From EU Knowledge Graph
Jump to navigation Jump to search
(‎Removed claim: financed by (P890): Directorate-General for Regional and Urban Policy (Q8361), Removing unnecessary financed by statement)
(‎Changed an Item: Change because item Q214255 was merged with Q4859)
Property / contained in NUTSProperty / contained in NUTS

Revision as of 15:44, 27 December 2020

Project Q10236 in Czech Republic
Language Label Description Also known as
English
System for early detection of condensation on heat exchange surfaces
Project Q10236 in Czech Republic

    Statements

    0 references
    4,759,440.0 Czech koruna
    0 references
    190,377.6 Euro
    10 January 2020
    0 references
    8,400,000.0 Czech koruna
    0 references
    336,000.0 Euro
    10 January 2020
    0 references
    56.66 percent
    0 references
    1 October 2016
    0 references
    31 July 2019
    0 references
    31 July 2019
    0 references
    SVÚM a.s.
    0 references
    0 references

    50°9'45.68"N, 14°45'41.47"E
    0 references
    25088
    0 references
    Cílem projektu je vývoj a uvedení do praktického provozu systém pro detekci vzniku korozně rizikových stavů z důvodu kondenzace složek spalin. Tento systém je primárně určen pro kogenerační jednotky s ORC cyklem, kde je využíváno odpadní teplo z alternativních zdrojů a provoz je tak ohrožen korozí pod rosným bodem. Systém včasného varování je důležitý z důvodu použití hořlavých médií v tepelných výměnících ORC cyklů a musí tudíž být minimalizována možnost jejich poškození. a. (Czech)
    0 references
    The aim of the project is to develop and put into practical operation a system for detection of corrosion risk states due to condensation of flue gas components. This system is primarily designed for cogeneration units with ORC cycle, where waste heat is used from alternative sources and the operation is thus threatened by corrosion under dew point. The early warning system is important because of the use of flammable media in heat exchangers ORC cycles and therefore the possibility of damaging them must be minimised. a. (English)
    22 October 2020
    0 references

    Identifiers

    CZ.01.1.02/0.0/0.0/15_019/0004670
    0 references