Development of renewable energy at the site of Ane’s Kft. (Q3935224): Difference between revisions

From EU Knowledge Graph
Jump to navigation Jump to search
(‎Changed an Item: Adding English translations)
(‎Removed claim: summary (P836): In the framework of the project, he plans to implement a solar system from high-quality solar modules with high efficiency and lifetime. The maximum rated power output of the solar system is 480 kW (solar cells with a total rated power of 531.6 kW are connected to the DC side of the inverters). The purpose of the user is to partially replace electricity consumption by generating equipment using renewable energy sources. 860 kW inverters are co...)
Property / summary
In the framework of the project, he plans to implement a solar system from high-quality solar modules with high efficiency and lifetime. The maximum rated power output of the solar system is 480 kW (solar cells with a total rated power of 531.6 kW are connected to the DC side of the inverters). The purpose of the user is to partially replace electricity consumption by generating equipment using renewable energy sources. 860 kW inverters are connected to the network of 8840 Csurgó, 1773 hrs. The 4 working points of the inverters are coupled with a string of 2 x 18 solar panels per working point, with a string of 1x18 pcs solar panels attached to one working point. PV Solar Panel Modules Electric Data: Type: Ja Solar JAM72S10-410/PR Cells: monocrystalline Size: ~2015 mm x 996 mm x 40 mm U0C: ~50,12V ISC: ~10,37 Electrical data of Inverters: For the solar system: 8 Pcs HUAWEI SUN2000-60KTL-M0 Max AC power: 60000 W Max DC Voltage: 1100V MPPT: 200V-1000V Max AC current: 95,3A AC voltage: 400V/230V Phase 3 Effectiveness: 98.5 % The modules shall be connected to each other with the patch cables on them via MC4 fast connectors. The first and last module of the string is connected to the corresponding string input of the inverter using a UV standing 1x4 mm² solar cable with a quick connector. The inverter receives the synchronisation signal from this AC network. The design described above is ideal for sizing with modern 3-phase inverters. The inverter converts the DC voltage from the solar panels to an alternating voltage of 400 V/50 Hz. The shape of the regenerated current is completely sinusoidal, with very low harmonic distortion, the signal-shape is controlled by a microprocessor. Continuous control ensures full automatic operation. Independent processor system checks network data and shuts down if the network synchronisation cannot be maintained. The inverters also have communication outputs. Communication is not installed in the basic case, but the amount of electricity generated can still be tracked on the inverters’ display. The solar panel system is automatic and does not require external intervention. It runs from sunrise to sunset. The inverter is automatically connected to the grid when the lanced voltage of the solar panels exceeds the set UPV start value on the inverter and is detached when the solar cells chained voltage drops below the set value due to a decrease in light power. The DC power generated by solar panels is channelled through a solar cable to the inverters placed in the mechanical hemisphere. The 8 3-phase inverters work on a common control cabinet. This is where the AC-side connection of the inverters is done. Then connect it to the electrical distributor. The modules, connecting boxes, are used to connect dual insulated cables with UV standing SOLAR cables and 1.8 kV insulated cables. The modules can be connected to the PATCH cables installed in the factory. Swing cables shall be attached to the module with UV-fixed fasteners in order to avoid mechanical damage caused by wind effects. Cables used to connect module rows and junction boxes shall be laid as short as possible. Cable laying is carried out by attaching it to the UV standing protective tube placed under that string. (English)
 
Property / summary: In the framework of the project, he plans to implement a solar system from high-quality solar modules with high efficiency and lifetime. The maximum rated power output of the solar system is 480 kW (solar cells with a total rated power of 531.6 kW are connected to the DC side of the inverters). The purpose of the user is to partially replace electricity consumption by generating equipment using renewable energy sources. 860 kW inverters are connected to the network of 8840 Csurgó, 1773 hrs. The 4 working points of the inverters are coupled with a string of 2 x 18 solar panels per working point, with a string of 1x18 pcs solar panels attached to one working point. PV Solar Panel Modules Electric Data: Type: Ja Solar JAM72S10-410/PR Cells: monocrystalline Size: ~2015 mm x 996 mm x 40 mm U0C: ~50,12V ISC: ~10,37 Electrical data of Inverters: For the solar system: 8 Pcs HUAWEI SUN2000-60KTL-M0 Max AC power: 60000 W Max DC Voltage: 1100V MPPT: 200V-1000V Max AC current: 95,3A AC voltage: 400V/230V Phase 3 Effectiveness: 98.5 % The modules shall be connected to each other with the patch cables on them via MC4 fast connectors. The first and last module of the string is connected to the corresponding string input of the inverter using a UV standing 1x4 mm² solar cable with a quick connector. The inverter receives the synchronisation signal from this AC network. The design described above is ideal for sizing with modern 3-phase inverters. The inverter converts the DC voltage from the solar panels to an alternating voltage of 400 V/50 Hz. The shape of the regenerated current is completely sinusoidal, with very low harmonic distortion, the signal-shape is controlled by a microprocessor. Continuous control ensures full automatic operation. Independent processor system checks network data and shuts down if the network synchronisation cannot be maintained. The inverters also have communication outputs. Communication is not installed in the basic case, but the amount of electricity generated can still be tracked on the inverters’ display. The solar panel system is automatic and does not require external intervention. It runs from sunrise to sunset. The inverter is automatically connected to the grid when the lanced voltage of the solar panels exceeds the set UPV start value on the inverter and is detached when the solar cells chained voltage drops below the set value due to a decrease in light power. The DC power generated by solar panels is channelled through a solar cable to the inverters placed in the mechanical hemisphere. The 8 3-phase inverters work on a common control cabinet. This is where the AC-side connection of the inverters is done. Then connect it to the electrical distributor. The modules, connecting boxes, are used to connect dual insulated cables with UV standing SOLAR cables and 1.8 kV insulated cables. The modules can be connected to the PATCH cables installed in the factory. Swing cables shall be attached to the module with UV-fixed fasteners in order to avoid mechanical damage caused by wind effects. Cables used to connect module rows and junction boxes shall be laid as short as possible. Cable laying is carried out by attaching it to the UV standing protective tube placed under that string. (English) / rank
Normal rank
 
Property / summary: In the framework of the project, he plans to implement a solar system from high-quality solar modules with high efficiency and lifetime. The maximum rated power output of the solar system is 480 kW (solar cells with a total rated power of 531.6 kW are connected to the DC side of the inverters). The purpose of the user is to partially replace electricity consumption by generating equipment using renewable energy sources. 860 kW inverters are connected to the network of 8840 Csurgó, 1773 hrs. The 4 working points of the inverters are coupled with a string of 2 x 18 solar panels per working point, with a string of 1x18 pcs solar panels attached to one working point. PV Solar Panel Modules Electric Data: Type: Ja Solar JAM72S10-410/PR Cells: monocrystalline Size: ~2015 mm x 996 mm x 40 mm U0C: ~50,12V ISC: ~10,37 Electrical data of Inverters: For the solar system: 8 Pcs HUAWEI SUN2000-60KTL-M0 Max AC power: 60000 W Max DC Voltage: 1100V MPPT: 200V-1000V Max AC current: 95,3A AC voltage: 400V/230V Phase 3 Effectiveness: 98.5 % The modules shall be connected to each other with the patch cables on them via MC4 fast connectors. The first and last module of the string is connected to the corresponding string input of the inverter using a UV standing 1x4 mm² solar cable with a quick connector. The inverter receives the synchronisation signal from this AC network. The design described above is ideal for sizing with modern 3-phase inverters. The inverter converts the DC voltage from the solar panels to an alternating voltage of 400 V/50 Hz. The shape of the regenerated current is completely sinusoidal, with very low harmonic distortion, the signal-shape is controlled by a microprocessor. Continuous control ensures full automatic operation. Independent processor system checks network data and shuts down if the network synchronisation cannot be maintained. The inverters also have communication outputs. Communication is not installed in the basic case, but the amount of electricity generated can still be tracked on the inverters’ display. The solar panel system is automatic and does not require external intervention. It runs from sunrise to sunset. The inverter is automatically connected to the grid when the lanced voltage of the solar panels exceeds the set UPV start value on the inverter and is detached when the solar cells chained voltage drops below the set value due to a decrease in light power. The DC power generated by solar panels is channelled through a solar cable to the inverters placed in the mechanical hemisphere. The 8 3-phase inverters work on a common control cabinet. This is where the AC-side connection of the inverters is done. Then connect it to the electrical distributor. The modules, connecting boxes, are used to connect dual insulated cables with UV standing SOLAR cables and 1.8 kV insulated cables. The modules can be connected to the PATCH cables installed in the factory. Swing cables shall be attached to the module with UV-fixed fasteners in order to avoid mechanical damage caused by wind effects. Cables used to connect module rows and junction boxes shall be laid as short as possible. Cable laying is carried out by attaching it to the UV standing protective tube placed under that string. (English) / qualifier
point in time: 8 February 2022
Timestamp+2022-02-08T00:00:00Z
Timezone+00:00
CalendarGregorian
Precision1 day
Before0
After0
 

Revision as of 22:02, 8 February 2022

Project Q3935224 in Hungary
Language Label Description Also known as
English
Development of renewable energy at the site of Ane’s Kft.
Project Q3935224 in Hungary

    Statements

    contained in NUTS
    Somogy
    0 references
    country
    Hungary
    0 references
    EU contribution
    398,190.24 Euro
    exchange rate to Euro
    0.00276521 Euro
    point in time
    3 December 2021
    0 references
    144,000,000 forint
    0 references
    budget
    715,712.884 Euro
    exchange rate to Euro
    0.0027336256 Euro
    point in time
    15 December 2021
    0 references
    261,818,181.818 forint
    0 references
    co-financing rate
    55.0 percent
    0 references
    start time
    1 September 2020
    0 references
    end time
    31 August 2022
    0 references
    beneficiary name (string)
    Ane's Korlátolt Felelősségű Társaság
    0 references
    beneficiary
    Q3975144
    0 references
    coordinate location

    46°15'59.08"N, 17°5'34.58"E
    0 references
    summary
    A projekt keretében napelemes rendszer kivitelezését tervezi Támogatásigénylő kiváló minőségű, hatásfokú és élettartammal rendelkező napelem modulokból. A napelemes rendszer névleges maximális kimenti villamos teljesítménye 480 kW (az inverterek egyenáramú oldalaira 531,6 kW névleges összteljesítményű napelemek csatlakoznak). A felhasználó célja a villamos energiafogyasztásának részbeni kiváltása megújuló energiaforrással működő termelő berendezéssel. 8840 Csurgó, 1773 hrsz-ű inghatlan villamosenergia hálózatához 8 db 60 kW-os inverter kerül csat-lakoztatásra. Az inverterek 4 munkapontjára munkapontonként 2 x 18 db napelemből álló füzér kapcsolódik, egy munkapontjára 1x18db napelemből álló füzér kapcsolódik. PV napelem modulok elektromos adatai: Típus: JA Solar JAM72S10 -410/PR Cellák: monokristályos Méret: ~2015mm x 996mm x 40mm U0C: ~50,12V ISC: ~10,37 Inverterek elektromos adatai: A napelemes rendszerhez: 8 db HUAWEI SUN2000-60KTL-M0 Max AC teljesítmény: 60000W Max DC feszültség: 1100V MPPT: 200V- 1000V Max AC áram: 95,3A AC feszültség: 400V/230V 3 fázis Hatásfok: 98,5% A modulokat egymással a rajtuk található patch kábelekkel MC4-es gyorscsatlakozókon keresztül kell összekötni. A string első és utolsó modulját gyorscsatlakozóval ellátott UV álló 1x4mm2 szolár kábel segítségével kötjük az inverter megfelelő string bemenetére. Az inverter ezen AC hálózatból veszi a szinkronozási jelet. A fentiekben ismertetett kialakítás ideális méretezést jelent a korszerű, 3 fázisú inverterekkel összekapcsolva. Az inverter a napelemek felől érkező egyenfeszültséget alakítja át 400 V / 50 Hz-es váltakozó feszültséggé. A visszatáplált áram alakja teljesen szinuszos, nagyon alacsony harmonikus torzítással, a jel-alakot egy mikroprocesszor szabályozza. A folyamatos szabályzás, teljesen automatikus működést biztosít. Független processzoros rendszer ellenőrzi a hálózati adatokat és kikapcsol amennyiben a hálózati szinkron nem tartható. Az inverterek kommunikációs kimenetekkel is rendelkeznek. A kommunikáció alap esteben nem kerül kiépítésre, de az inverterek kijelzőjén így is követhető a megtermelt villamos energia mennyisége. A napelemes rendszer automatikus működésű, külső beavatkozást nem igényel. Napi üzemideje nap-keltétől napnyugtáig tart. Az inverter a hálózatra automatikusan kapcsolódik, amikor a napelemek lán-colt feszültsége az inverteren beállított UPV start értéket meghaladja, és leválik amikor a fényenergia csökkenése miatt a napelemek láncolt feszültsége a beállított érték alá csökken. A napelemek által megtermelt DC villamos energiát szolár kábelen keresztül vezetjük a gépészeti he-lyiségben elhelyezett inverterekhez. A 8 db 3 fázisú inverter egy közös kapcsolószekrényre dolgozik rá. Itt történik az inverterek AC oldali összekötése. Ezt követően kapcsoljuk rá a villamos elosztóra. A modulok, összekötődobozok összekötésére használt kettős szigetelt kábeleket UV álló SOLAR kábelek és 1,8 kV szigetelésűek. A modulok csatlakozását a modulokon található gyárilag elhelyezett PATCH kábelekre erősí-tett gyorscsatlakozók segítségével valósíthatóak meg. A lengő kábeleket a modulhoz kell UV álló kötőelemekkel rögzíteni, esetleges szélhatások által okozott mechanikai sérülések elkerülé-se érdekében. A modulsorok és a csatlakozódobozok összekötésére használt kábeleket a lehető legrövidebb úton kell fektetni. A kábelfektetés az adott string alatt elhelyezett UV álló védő-csőbe fűzve történik. (Hungarian)
    0 references
    location (string)
    Csurgó, Somogy
    0 references

    Identifiers

    Hungarian Kohesio ID
    GINOP-4.1.4-19-2020-02232
    0 references
     
    Retrieved from "https://linkedopendata.eu/w/index.php?title=Item:Q3935224&oldid=27394942"