Increasing the production capacity of MÁTYUS Kft. (Q3915581): Difference between revisions
Jump to navigation
Jump to search
(Changed an Item: add summary) |
(Changed an Item: Adding English translations) |
||||||||||||||
| Property / summary | |||||||||||||||
KGYÁ1100 — small roll manufacturer and packaging complete station for paper rolls, cash register, ATM, POS and fax rolls. The base machine includes a wind extracting pneumatic coil lifter and a colour printing machine. It contains the necessary elements to receive the colour printing unit. The maximum width of the coil you can handle is 1 100 mm. The base machine contains 1 rewinding shaft. The maximum diameter of the coils is 1 200 mm, the coil rack hole is 76 mm. The machine cut max cut diameter 300 mm, the min outer diameter of the buckles is 13 mm, the max 30 mm.?a min cutting width is 28 mm. The engine power is 7.5 KW, the acceleration and deceleration speeds are adjustable. The max linear velocity is 260 m/min. There are 4 separate electronic meter counters for automatic stop and end signaling. The production capacity of the device is 500/600 axle discarding during 8 hours shift with standard coil length (40-140 m). 28 knives,180 spacers would be installed to ensure different cutting widths. 2 pcs 12 mm diameter sieves and 2 vacuum-system wind extractors are included in the base machine. The riding roller is powered by an adjustable spring clutch, and the riding roller load can also be adjusted to change the hardness of the finished products. It has air-cooled disc brakes, 2 brake calipers, and a work brake and stop brake are installed to brake the base coil. For the adjustable length and width of the coil, an automatic end-signalling puller is also installed. Electrical supply of the control cabinet 380/400 V, 3 phase, 50 Hz. The machine bears the CE marking and the certificate of conformity in accordance with Regulation No 21/1998 (IV) IKIM and complies with the European Directives. The LCD display of the machine has an operating interface in Hungarian, it has automatic settings and a meter counter. The machine operates with electropneumatic valves, after a start signal, the machine automatically trimmes, presses and rolls the coils with the specified parameters. After wrapping, the product is wrapped with the help of the tunnel-system, 12.5 kW wrapper, so the machine produces a finished product packed straight. In addition, a household-sized, 24.96 kW photovoltaic solar system installed on the roof will be installed with the installation of 96 260 Wp Luxor Ecoline LX260 solar modules and a Samil Power Solar Lake 25000TL-PM inverter suitable for system performance, with a power of 25 kVA. Based on the consumption data of recent years, the solar system has been scaled in such a way that its entire production is used in the building concerned, so no electricity is sold. Furthermore, a production management and production programming system will be put in place under this project. (English) | |||||||||||||||
| Property / summary: KGYÁ1100 — small roll manufacturer and packaging complete station for paper rolls, cash register, ATM, POS and fax rolls. The base machine includes a wind extracting pneumatic coil lifter and a colour printing machine. It contains the necessary elements to receive the colour printing unit. The maximum width of the coil you can handle is 1 100 mm. The base machine contains 1 rewinding shaft. The maximum diameter of the coils is 1 200 mm, the coil rack hole is 76 mm. The machine cut max cut diameter 300 mm, the min outer diameter of the buckles is 13 mm, the max 30 mm.?a min cutting width is 28 mm. The engine power is 7.5 KW, the acceleration and deceleration speeds are adjustable. The max linear velocity is 260 m/min. There are 4 separate electronic meter counters for automatic stop and end signaling. The production capacity of the device is 500/600 axle discarding during 8 hours shift with standard coil length (40-140 m). 28 knives,180 spacers would be installed to ensure different cutting widths. 2 pcs 12 mm diameter sieves and 2 vacuum-system wind extractors are included in the base machine. The riding roller is powered by an adjustable spring clutch, and the riding roller load can also be adjusted to change the hardness of the finished products. It has air-cooled disc brakes, 2 brake calipers, and a work brake and stop brake are installed to brake the base coil. For the adjustable length and width of the coil, an automatic end-signalling puller is also installed. Electrical supply of the control cabinet 380/400 V, 3 phase, 50 Hz. The machine bears the CE marking and the certificate of conformity in accordance with Regulation No 21/1998 (IV) IKIM and complies with the European Directives. The LCD display of the machine has an operating interface in Hungarian, it has automatic settings and a meter counter. The machine operates with electropneumatic valves, after a start signal, the machine automatically trimmes, presses and rolls the coils with the specified parameters. After wrapping, the product is wrapped with the help of the tunnel-system, 12.5 kW wrapper, so the machine produces a finished product packed straight. In addition, a household-sized, 24.96 kW photovoltaic solar system installed on the roof will be installed with the installation of 96 260 Wp Luxor Ecoline LX260 solar modules and a Samil Power Solar Lake 25000TL-PM inverter suitable for system performance, with a power of 25 kVA. Based on the consumption data of recent years, the solar system has been scaled in such a way that its entire production is used in the building concerned, so no electricity is sold. Furthermore, a production management and production programming system will be put in place under this project. (English) / rank | |||||||||||||||
Normal rank | |||||||||||||||
| Property / summary: KGYÁ1100 — small roll manufacturer and packaging complete station for paper rolls, cash register, ATM, POS and fax rolls. The base machine includes a wind extracting pneumatic coil lifter and a colour printing machine. It contains the necessary elements to receive the colour printing unit. The maximum width of the coil you can handle is 1 100 mm. The base machine contains 1 rewinding shaft. The maximum diameter of the coils is 1 200 mm, the coil rack hole is 76 mm. The machine cut max cut diameter 300 mm, the min outer diameter of the buckles is 13 mm, the max 30 mm.?a min cutting width is 28 mm. The engine power is 7.5 KW, the acceleration and deceleration speeds are adjustable. The max linear velocity is 260 m/min. There are 4 separate electronic meter counters for automatic stop and end signaling. The production capacity of the device is 500/600 axle discarding during 8 hours shift with standard coil length (40-140 m). 28 knives,180 spacers would be installed to ensure different cutting widths. 2 pcs 12 mm diameter sieves and 2 vacuum-system wind extractors are included in the base machine. The riding roller is powered by an adjustable spring clutch, and the riding roller load can also be adjusted to change the hardness of the finished products. It has air-cooled disc brakes, 2 brake calipers, and a work brake and stop brake are installed to brake the base coil. For the adjustable length and width of the coil, an automatic end-signalling puller is also installed. Electrical supply of the control cabinet 380/400 V, 3 phase, 50 Hz. The machine bears the CE marking and the certificate of conformity in accordance with Regulation No 21/1998 (IV) IKIM and complies with the European Directives. The LCD display of the machine has an operating interface in Hungarian, it has automatic settings and a meter counter. The machine operates with electropneumatic valves, after a start signal, the machine automatically trimmes, presses and rolls the coils with the specified parameters. After wrapping, the product is wrapped with the help of the tunnel-system, 12.5 kW wrapper, so the machine produces a finished product packed straight. In addition, a household-sized, 24.96 kW photovoltaic solar system installed on the roof will be installed with the installation of 96 260 Wp Luxor Ecoline LX260 solar modules and a Samil Power Solar Lake 25000TL-PM inverter suitable for system performance, with a power of 25 kVA. Based on the consumption data of recent years, the solar system has been scaled in such a way that its entire production is used in the building concerned, so no electricity is sold. Furthermore, a production management and production programming system will be put in place under this project. (English) / qualifier | |||||||||||||||
point in time: 8 February 2022
| |||||||||||||||
Revision as of 14:35, 8 February 2022
Project Q3915581 in Hungary
| Language | Label | Description | Also known as |
|---|---|---|---|
| English | Increasing the production capacity of MÁTYUS Kft. |
Project Q3915581 in Hungary |
Statements
60,251,900 forint
0 references
329,412.273 Euro
0.0027336256 Euro
14 December 2021
0 references
120,503,800.0 forint
0 references
50.0 percent
0 references
14 September 2018
0 references
2 October 2019
0 references
MÁTYUS Ipari, Szolgáltató és Kereskedelmi Korlátolt felelősségű társaság
0 references
47°10'31.66"N, 20°11'40.85"E
0 references
KGYÁ1100 - Kistekercs gyártó és csomagoló komplett állomás papírtekercsek, pénztárgép, ATM, POS és faxtekercsek gyártásához. Az alapgéphez tartozik egy szélselejt elszívó pneumatikus tekercsbeemelő, és egy színnyomómű. Az tartalmazza a színnyomó egység fogadásához szükséges elemeket. A legnagyobb szélességű tekercs amit kezelni tud, 1100mm. Az alapgép 1 db letekercselő tengelyt tartalmaz. Az anyatekercsek legnagyobb átmérője 1200 mm, a tekercstartó duda furata 76mm. A gép által vágott max vágott átmérő 300mm, a csévék min külső átmérője 13mm, a max 30mm.?a min vágási szélesség 28 mm. A motorteljesítmény 7,5 KW, a gyorsulási és lassulási sebesség állítható. A max lineáris gyorsaság 260 m/perc. 4 különálló elektronikus méterszámláló van az automata megállításhoz, és végjelzés készítéshez. Az eszköz gyártókapacitása 500/600 tengelykidobás 8 órás műszak során standard tekercshosszúsággal (40-140m). 28 db késszett,180 db távtartó kerülne beépítésre a különböző vágási szélességek biztosításához. 2 db 12mm átmérőjű csévepálca, és 2 db vákuumrendszerű szélelszívó is az alapgép tartozéka. A lovaglóhenger állítható rugós kuplungtárcsával hajtott, és a lovaglóhenger terhelés is állítható a késztermékek keménységének változtatására. Léghűtéses tárcsafékkel, 2 db féknyereggel rendelkezik, továbbá munkafék és megállítófék is beépítésre kerül az alaptekercs fékezéséhez. A tekercs beállítható hossza, és szélessége érdekében automatikus végjelzéshúzó is beépítésre kerül. A vezérlőszekrény elektromos ellátása 380/400 V, 3 fázis, 50 Hz. A gép tartalmazza a CE jelölést és a 21/1998 (IV) IKIM rendelet szerinti megfelelőségi nyilatkozatot, megfelel az európai irányelveknek. A gép LCD kijelzője, magyar nyelvű kezelői felülettel rendelkezik, automata beállításokkal, méterszámlálóval ellátott. A gép elektropneumatikus szelepekkel működik, start jelet követően a gép a megadott paraméterekkel rendelkező tekercseket automatikusan vágja, nyomja és feltekercseli. Feltekercselés után a termék az alagút rendszerű, 12,5 kW teljesítményű fóliázó segítségével fóliacsomagolást kap, ezáltal a gép egyből becsomagolt készterméket gyárt. Ezek mellett kiépítésre kerül egy tetőre telepített háztartási méretű, 24,96 kW teljesítményű fotovoltaikus napelemes rendszer 96 db 260 Wp-s Luxor EcoLine LX260 típusú napelem modul felszerelésével, illetve a rendszer teljesítményéhez megfelelő Samil Power Solar Lake 25000TL-PM típusú inverterrel, melynek teljesítménye 25 kVA. A napelemes rendszer az elmúlt évek fogyasztási adatai alapján úgy lett méretezve, hogy annak teljes termelése az adott épületben felhasználásra kerül, így villamos energia értékesítés nem történik. Továbbá jelen projekt keretében sor kerül termelés-irányítási, termelés-programozási rendszer bevezetésére. (Hungarian)
0 references
KGYÁ1100 — small roll manufacturer and packaging complete station for paper rolls, cash register, ATM, POS and fax rolls. The base machine includes a wind extracting pneumatic coil lifter and a colour printing machine. It contains the necessary elements to receive the colour printing unit. The maximum width of the coil you can handle is 1 100 mm. The base machine contains 1 rewinding shaft. The maximum diameter of the coils is 1 200 mm, the coil rack hole is 76 mm. The machine cut max cut diameter 300 mm, the min outer diameter of the buckles is 13 mm, the max 30 mm.?a min cutting width is 28 mm. The engine power is 7.5 KW, the acceleration and deceleration speeds are adjustable. The max linear velocity is 260 m/min. There are 4 separate electronic meter counters for automatic stop and end signaling. The production capacity of the device is 500/600 axle discarding during 8 hours shift with standard coil length (40-140 m). 28 knives,180 spacers would be installed to ensure different cutting widths. 2 pcs 12 mm diameter sieves and 2 vacuum-system wind extractors are included in the base machine. The riding roller is powered by an adjustable spring clutch, and the riding roller load can also be adjusted to change the hardness of the finished products. It has air-cooled disc brakes, 2 brake calipers, and a work brake and stop brake are installed to brake the base coil. For the adjustable length and width of the coil, an automatic end-signalling puller is also installed. Electrical supply of the control cabinet 380/400 V, 3 phase, 50 Hz. The machine bears the CE marking and the certificate of conformity in accordance with Regulation No 21/1998 (IV) IKIM and complies with the European Directives. The LCD display of the machine has an operating interface in Hungarian, it has automatic settings and a meter counter. The machine operates with electropneumatic valves, after a start signal, the machine automatically trimmes, presses and rolls the coils with the specified parameters. After wrapping, the product is wrapped with the help of the tunnel-system, 12.5 kW wrapper, so the machine produces a finished product packed straight. In addition, a household-sized, 24.96 kW photovoltaic solar system installed on the roof will be installed with the installation of 96 260 Wp Luxor Ecoline LX260 solar modules and a Samil Power Solar Lake 25000TL-PM inverter suitable for system performance, with a power of 25 kVA. Based on the consumption data of recent years, the solar system has been scaled in such a way that its entire production is used in the building concerned, so no electricity is sold. Furthermore, a production management and production programming system will be put in place under this project. (English)
8 February 2022
0 references
Szolnok, Jász-Nagykun-Szolnok
0 references
Identifiers
GINOP-1.2.1-16-2017-00342
0 references