3B Hungaria Kft. Acquisition of transport lasers and warehouses (Q3914673): Difference between revisions
Jump to navigation
Jump to search
(Changed an Item: add summary) |
(Changed an Item: Adding English translations) |
||||||||||||||
| Property / summary | |||||||||||||||
As part of the project, 1 Bysprint Fiber 3015, 4000 W Supplier Laser equipment will be purchased. Technical parameters: Drive system: Direct gearless gearbox drive, high torque, long service life due to low bearing loads, closed and protected drive. Cutting head: Optimal lens spacing integrated capacitive sensor, Bypos Fiber automatic focal point adjustment. Treatment: manual actuator for quick settings, interrupted cutting areas can be continued. Byvision control: Modifications are possible directly from the control panel, activating, deactivating, creating micro-connections without starting the programming software, integrating separate parts into each other based on existing matching plans, little process input, reduced off-times, higher productivity. Laser: the highest energy efficiency, due to the lowest electrical energy consumption, very low operating costs by the state-of-the-art Transport Laser (no need for laser gas, minimum wear material demand), extended cutable material spectrum (non-ferrous metals). Equipment length: 10 500 mm, width 6 200 mm, height 2 500 mm, nominal plate size: 1 500 mm, cutting range (x) 3 048 mm, (Y) 1 524 mm, (Z) 70 mm, maximum positioning speed parallel to X/Y axis 100 m/min, maximum simultaneous positioning speed 140 m/min, maximum axis acceleration 12 m/s2, positioning accuracy Pa (VDI/DGQ 3441) ± 0.1 mm, repeating accuracy Ps (VDI/DGQ3441) ± 0.05 mm, wind detection accuracy ± 0.5 mm, maximum workpiece mass 890 kg, equipment weight: 12 000 kg, tablet replacement time 35 s, laser beam source Fiber 4000, power 4000 W, adjustable interval 400-4000 W, wavelength Fiber, pulse frequency 1-2 500 Hz, maximum cut material thickness soft steel: 20 mm, stainless steel 15 mm, aluminum 15 mm, brass 8 mm, copper 8 mm, total system energy consumption (cooler, extractor) 25.3 kW. 2 warehouse automatic equipment with lift system Kardex SHUTTLE-XP-500-2450864 will also be purchased. Technical parameters: The unit provides a storage area of 148.19 m with 70 usable storage trays on an area of only 8.55 m², with an average load height of about 150 mm. Dimensions of the storage trays: 2450x864 mm, load capacity: 490 kg. Device height 8 550 mm, required headroom: 8 570 mm, apparatus width: 2 780 mm, device depth: 3 074 mm, area of apparatus: 8.55 m², floor area: 1 120 cm², maximum gross load capacity: 38 360 kg, maximum net load capacity: 34 300 kg, tare weight: 3 424 kg, total weight: 41 784 kg. The works shall have the following characteristics: The height of the 2 pcs Kardex SHUTTLE-XP, computer-controlled warehouse automatic equipment is 8.55 meters, it is necessary to break the roof structure for installation and to lift the roof to the required height for the operation of the elevator system. (English) | |||||||||||||||
| Property / summary: As part of the project, 1 Bysprint Fiber 3015, 4000 W Supplier Laser equipment will be purchased. Technical parameters: Drive system: Direct gearless gearbox drive, high torque, long service life due to low bearing loads, closed and protected drive. Cutting head: Optimal lens spacing integrated capacitive sensor, Bypos Fiber automatic focal point adjustment. Treatment: manual actuator for quick settings, interrupted cutting areas can be continued. Byvision control: Modifications are possible directly from the control panel, activating, deactivating, creating micro-connections without starting the programming software, integrating separate parts into each other based on existing matching plans, little process input, reduced off-times, higher productivity. Laser: the highest energy efficiency, due to the lowest electrical energy consumption, very low operating costs by the state-of-the-art Transport Laser (no need for laser gas, minimum wear material demand), extended cutable material spectrum (non-ferrous metals). Equipment length: 10 500 mm, width 6 200 mm, height 2 500 mm, nominal plate size: 1 500 mm, cutting range (x) 3 048 mm, (Y) 1 524 mm, (Z) 70 mm, maximum positioning speed parallel to X/Y axis 100 m/min, maximum simultaneous positioning speed 140 m/min, maximum axis acceleration 12 m/s2, positioning accuracy Pa (VDI/DGQ 3441) ± 0.1 mm, repeating accuracy Ps (VDI/DGQ3441) ± 0.05 mm, wind detection accuracy ± 0.5 mm, maximum workpiece mass 890 kg, equipment weight: 12 000 kg, tablet replacement time 35 s, laser beam source Fiber 4000, power 4000 W, adjustable interval 400-4000 W, wavelength Fiber, pulse frequency 1-2 500 Hz, maximum cut material thickness soft steel: 20 mm, stainless steel 15 mm, aluminum 15 mm, brass 8 mm, copper 8 mm, total system energy consumption (cooler, extractor) 25.3 kW. 2 warehouse automatic equipment with lift system Kardex SHUTTLE-XP-500-2450864 will also be purchased. Technical parameters: The unit provides a storage area of 148.19 m with 70 usable storage trays on an area of only 8.55 m², with an average load height of about 150 mm. Dimensions of the storage trays: 2450x864 mm, load capacity: 490 kg. Device height 8 550 mm, required headroom: 8 570 mm, apparatus width: 2 780 mm, device depth: 3 074 mm, area of apparatus: 8.55 m², floor area: 1 120 cm², maximum gross load capacity: 38 360 kg, maximum net load capacity: 34 300 kg, tare weight: 3 424 kg, total weight: 41 784 kg. The works shall have the following characteristics: The height of the 2 pcs Kardex SHUTTLE-XP, computer-controlled warehouse automatic equipment is 8.55 meters, it is necessary to break the roof structure for installation and to lift the roof to the required height for the operation of the elevator system. (English) / rank | |||||||||||||||
Normal rank | |||||||||||||||
| Property / summary: As part of the project, 1 Bysprint Fiber 3015, 4000 W Supplier Laser equipment will be purchased. Technical parameters: Drive system: Direct gearless gearbox drive, high torque, long service life due to low bearing loads, closed and protected drive. Cutting head: Optimal lens spacing integrated capacitive sensor, Bypos Fiber automatic focal point adjustment. Treatment: manual actuator for quick settings, interrupted cutting areas can be continued. Byvision control: Modifications are possible directly from the control panel, activating, deactivating, creating micro-connections without starting the programming software, integrating separate parts into each other based on existing matching plans, little process input, reduced off-times, higher productivity. Laser: the highest energy efficiency, due to the lowest electrical energy consumption, very low operating costs by the state-of-the-art Transport Laser (no need for laser gas, minimum wear material demand), extended cutable material spectrum (non-ferrous metals). Equipment length: 10 500 mm, width 6 200 mm, height 2 500 mm, nominal plate size: 1 500 mm, cutting range (x) 3 048 mm, (Y) 1 524 mm, (Z) 70 mm, maximum positioning speed parallel to X/Y axis 100 m/min, maximum simultaneous positioning speed 140 m/min, maximum axis acceleration 12 m/s2, positioning accuracy Pa (VDI/DGQ 3441) ± 0.1 mm, repeating accuracy Ps (VDI/DGQ3441) ± 0.05 mm, wind detection accuracy ± 0.5 mm, maximum workpiece mass 890 kg, equipment weight: 12 000 kg, tablet replacement time 35 s, laser beam source Fiber 4000, power 4000 W, adjustable interval 400-4000 W, wavelength Fiber, pulse frequency 1-2 500 Hz, maximum cut material thickness soft steel: 20 mm, stainless steel 15 mm, aluminum 15 mm, brass 8 mm, copper 8 mm, total system energy consumption (cooler, extractor) 25.3 kW. 2 warehouse automatic equipment with lift system Kardex SHUTTLE-XP-500-2450864 will also be purchased. Technical parameters: The unit provides a storage area of 148.19 m with 70 usable storage trays on an area of only 8.55 m², with an average load height of about 150 mm. Dimensions of the storage trays: 2450x864 mm, load capacity: 490 kg. Device height 8 550 mm, required headroom: 8 570 mm, apparatus width: 2 780 mm, device depth: 3 074 mm, area of apparatus: 8.55 m², floor area: 1 120 cm², maximum gross load capacity: 38 360 kg, maximum net load capacity: 34 300 kg, tare weight: 3 424 kg, total weight: 41 784 kg. The works shall have the following characteristics: The height of the 2 pcs Kardex SHUTTLE-XP, computer-controlled warehouse automatic equipment is 8.55 meters, it is necessary to break the roof structure for installation and to lift the roof to the required height for the operation of the elevator system. (English) / qualifier | |||||||||||||||
point in time: 8 February 2022
| |||||||||||||||
Revision as of 14:30, 8 February 2022
Project Q3914673 in Hungary
| Language | Label | Description | Also known as |
|---|---|---|---|
| English | 3B Hungaria Kft. Acquisition of transport lasers and warehouses |
Project Q3914673 in Hungary |
Statements
210,142,047 forint
0 references
1,641,284.798 Euro
0.0027336256 Euro
14 December 2021
0 references
600,405,848.571 forint
0 references
35.0 percent
0 references
14 June 2016
0 references
31 January 2017
0 references
3B HUNGARIA Ipari, Kereskedelmi és Szolgáltató Korlátolt Felelősségű Társaság
0 references
46°50'29.69"N, 16°50'44.27"E
0 references
A projekt keretében beszerzésre kerül 1 db BySprint Fiber 3015 típusú, 4000 W-os szállézer berendezés. Műszaki paraméterei: Hajtásrendszer: Közvetlen, áttétel nélküli, fogasléces meghajtás, nagy nyomatékkal, hosszú élettartam az alacsony csapágyterhelések miatt, zárt és védett hajtás. Vágófej: Optimális lencsetávolság integrált kapacitív érzékelő, Bypos Fiber automatikus fókuszpont állítás. Kezelés: kézi működtető a gyors beállításokhoz, a megszakított vágási területek folytathatóak. ByVision vezérlés: Módosítások közvetlenül a kezelőpanelről lehetségesek, mikrokapcsolatok aktiválása, kikapcsolása, létrehozása a programozó szoftver indítása nélkül, különálló részek egymásba illesztése meglévő illesztési tervek alapján, kevés folyamat ráfordítás, csökkentett mellékidők, nagyobb termelékenység. Lézer: a legnagyobb energiahatékonyság, a legalacsonyabb elektromos energiafelhasználásnak köszönhetően, nagyon alacsony üzemeltetési költségek a csúcstechnológiás szállézer által (nincs szükség lézergázra, minimális kopóanyag igény), kibővült vágható anyagspektrum (színesfémek). Berendezés hosszúság: 10500 mm, szélesség 6200 mm, magasság 2500 mm, névleges lemezméret: 1500 mm, vágási tartomány (x) 3048 mm, (Y) 1524 mm, (Z) 70 mm, maximális pozícionálási sebesség az X/Y tengellyel párhuzamosan 100 m/min, maximális egyidejű pozícionálási sebesség 140 m/min, maximális tengelygyorsulás 12 m/s2, pozícionálási pontosság Pa (VDI/DGQ 3441) +-0,1 mm, ismétlési pontosság Ps (VDI/DGQ3441) +-0,05 mm, szélérzékelés pontossága +-0,5 mm, munkadarab maximális tömege 890 kg, berendezés tömege: 12000 kg, táblacsere ideje 35 s, lézer sugárforrás Fiber 4000, teljesítmény 4000 W, állíthatósági intervallum 400-4000W, hullámhossz Fiber, impulzusfrekvencia 1-2500 Hz, maximálisan vágható anyagvastagság lágyacél: 20 mm, rozsdamentes acél 15 mm, alumínium 15 mm, sárgaréz 8 mm, vörösréz 8 mm, a teljes rendszer energiafogyasztása (hűtővel, elszívóval) 25,3 kW. Szintén beszerzésre kerül 2 db Kardex SHUTTLE-XP-500-2450864 liftes rendszerű raktári automata berendezés. Műszaki paraméterek: A készülék mindössze 8,55 m2 alapterületen 70 db felhasználható tárolótálcával 148,19 m tároló területet biztosít, kb. 150 mm átlagos rakatmagassággal számolva. A tárolótálcák méretei: 2450x864 mm, teherbírása: 490 kg. Készülékmagasság 8550 mm, szükséges belmagasság: 8570 mm, készülék szélesség: 2780 mm, készülék mélység: 3074 mm, készülék alapterülete: 8,55 m2, felfekvési felület: 1120 cm2, maximális bruttó terhelhetőség: 38360 kg, maximális nettó terhelhetőség: 34300 kg, önsúly: 3424 kg, össztömeg: 41784 kg. Az építési beruházás jellemzői a következők: A 2 db Kardex SHUTTLE-XP rendszerű, számítógéppel vezérelt raktári automata berendezés magassága 8,55 méter, a beépítéshez a tetőszerkezetet megbontása válik szükségessé és a liftes rendszer működéséhez a kívánt magasságra a tetőt szükséges megemelni. (Hungarian)
0 references
As part of the project, 1 Bysprint Fiber 3015, 4000 W Supplier Laser equipment will be purchased. Technical parameters: Drive system: Direct gearless gearbox drive, high torque, long service life due to low bearing loads, closed and protected drive. Cutting head: Optimal lens spacing integrated capacitive sensor, Bypos Fiber automatic focal point adjustment. Treatment: manual actuator for quick settings, interrupted cutting areas can be continued. Byvision control: Modifications are possible directly from the control panel, activating, deactivating, creating micro-connections without starting the programming software, integrating separate parts into each other based on existing matching plans, little process input, reduced off-times, higher productivity. Laser: the highest energy efficiency, due to the lowest electrical energy consumption, very low operating costs by the state-of-the-art Transport Laser (no need for laser gas, minimum wear material demand), extended cutable material spectrum (non-ferrous metals). Equipment length: 10 500 mm, width 6 200 mm, height 2 500 mm, nominal plate size: 1 500 mm, cutting range (x) 3 048 mm, (Y) 1 524 mm, (Z) 70 mm, maximum positioning speed parallel to X/Y axis 100 m/min, maximum simultaneous positioning speed 140 m/min, maximum axis acceleration 12 m/s2, positioning accuracy Pa (VDI/DGQ 3441) ± 0.1 mm, repeating accuracy Ps (VDI/DGQ3441) ± 0.05 mm, wind detection accuracy ± 0.5 mm, maximum workpiece mass 890 kg, equipment weight: 12 000 kg, tablet replacement time 35 s, laser beam source Fiber 4000, power 4000 W, adjustable interval 400-4000 W, wavelength Fiber, pulse frequency 1-2 500 Hz, maximum cut material thickness soft steel: 20 mm, stainless steel 15 mm, aluminum 15 mm, brass 8 mm, copper 8 mm, total system energy consumption (cooler, extractor) 25.3 kW. 2 warehouse automatic equipment with lift system Kardex SHUTTLE-XP-500-2450864 will also be purchased. Technical parameters: The unit provides a storage area of 148.19 m with 70 usable storage trays on an area of only 8.55 m², with an average load height of about 150 mm. Dimensions of the storage trays: 2450x864 mm, load capacity: 490 kg. Device height 8 550 mm, required headroom: 8 570 mm, apparatus width: 2 780 mm, device depth: 3 074 mm, area of apparatus: 8.55 m², floor area: 1 120 cm², maximum gross load capacity: 38 360 kg, maximum net load capacity: 34 300 kg, tare weight: 3 424 kg, total weight: 41 784 kg. The works shall have the following characteristics: The height of the 2 pcs Kardex SHUTTLE-XP, computer-controlled warehouse automatic equipment is 8.55 meters, it is necessary to break the roof structure for installation and to lift the roof to the required height for the operation of the elevator system. (English)
8 February 2022
0 references
Zalaegerszeg, Zala
0 references
Identifiers
GINOP-1.2.1-15-2015-00653
0 references